Kyocera TASKalfa 8000i Operation Manual page 100

Settings for Forwarding from Command Center RX (RX/Forward Requirements)
You can use Command Center RX on a computer connected to the network to specify the forwarding settings
on this machine.
Refer to the machine's Operation Guide for information on the network settings.
Accessing Command Center RX
1
Open the web browser.
2
In the Address or Location bar, enter the machine's
IP address as the URL, e.g. http://192.168.48.21/.
The web page displays basic information about the
machine and Command Center RX as well as the
current status of the machine.
3
Enter the user name and password of the
administrator, and click Login.
Setting Administrator User Name, and Password
restricts general users' access to pages other than
the Start page. For security purposes, setting the
Administrator password is highly recommended.
The default Administrator password is factory-set
as 'Admin'.
4
Click 'Setting' from the navigation bar on the left to
view and set values for that particular category.
5
Click 'FAX / i-FAX'.
The Transmit Settings dialog box will appear.
For details, refer to the Command Center RX
Operation Guide.
4-32
FAX Operation (Advanced)