Kyocera TASKalfa 8000i Operation Manual page 199

i-FAX POP3 Settings
FAX/i-FAX > i-FAX > POP3
Use this page to specify the settings for the POP3 server used for Internet faxing.
The settings available on the i-FAX POP3 page are shown below.
Item
Check Interval
Run once now
†
E-mail Address
†
POP3 Server Name
POP3 Port Number
POP3 Server Timeout
†
Login User Name
†
Login Password
Use APOP
Test
E-mail Size Limit
Cover Page
After completing the settings, click Submit to save the settings.
† This item is required.
Displays the interval for connecting to the POP3 server to check for incoming
E-mail.
Click Receive to immediately connect to the POP3 server and check for
incoming E-mail.
Enter the i-FAX address (E-mail address). You can enter up to 64 characters.
Enter the POP3 server name or POP3 server IP address. You can enter up to
64 characters.
If you enter the server name, you must specify the IP address of the DNS
server. You can enter the DNS server IP address in the TCP/IP settings
screen. Refer to the machine's Operation Guide for details.
Sets the port number used by POP3. Normally, 110 is used.
Enter the timeout period in seconds.
Enter the login name for the user account. You can enter up to 64 characters.
Enter the password for the user account. You can enter up to 64 characters.
Specify whether to use APOP authentication. To use APOP authentication,
select On in this setting.
Runs a test to determine whether the settings specified in this page are correct.
Enter the maximum size for E-mails that can be received in kilobytes. You can
set up to 32,767 kilobytes. If 0 is entered, the setting does not limit the
maximum size.
Specify whether the E-mail messages are also printed. Select On to print faxes
with a cover page attached. If the E-mail message includes text, the text is
printed on the cover page.
8-7
Internet Faxing (i-FAX) (Option)
Description
8