Selecting the Transmission Mode
Transmission mode allows to respond to requests for read receipts on FAX arrival. To respond to receipt
requests, select Full in the Mode pull-down menu.
Specifying the Destinations Conditions
Item
Resolution
Compression
Paper Size
Selecting the Resolution
Select the resolution suitable for sending originals. If you selected a resolution that is prohibited by the
destination conditions, the fax is automatically sent using a lower (permitted) resolution. For information on how
to select the resolution, refer to Selecting the Resolution on page 3-9.
Selecting the Density
Adjust the density when scanning originals. For information on how to select the density, refer to Selecting the
Density on page 3-8.
Specify the resolutions that can be received by the destination fax
machine.
If you try to send an i-FAX using a prohibited resolution, it is automatically
changed to a permitted resolution and then sent.
•
200 × 100 dpi: Permitted (fixed)
•
200 × 200 dpi: Permitted (fixed)
•
200 × 400 dpi: Permitted or prohibited
•
400 × 400 dpi: Permitted or prohibited
•
600 × 600 dpi: Permitted or prohibited
To permit a resolution setting, press the key for that resolution so that it is
highlighted.
To prohibit a resolution, press the key again so that it is no longer
highlighted.
Select a suitable file format for the destination fax machine.
MH, MR, MMR or JBIG
Specify the suitable document size options for the destination fax machine.
If you try to send an i-FAX using a prohibited paper size, it is automatically
changed to a permitted paper size and then sent.
•
A4/Letter: Permitted (fixed)
•
B4: Permitted or prohibited
•
A3/Ledger: Permitted or prohibited
To permit a document size setting, press the key for that size so that it is
highlighted.
To prohibit a setting, press the key again so that it is no longer highlighted.
1
Press [Destination Condition].
2
Specify the destination conditions and press [OK].
Description
3
Press [OK].
8-10
Internet Faxing (i-FAX) (Option)