Kyocera TASKalfa 8000i Operation Manual page 114

FAX No. Entry - Sub Address
Sub Address
1234567890
Password
Space
Set sub address.
Enter sub address and password
using numeric keys. (Max. 20 digits)
Status
Backspace
Cancel OK
10/10/2010 10:10
4-46
NOTE:
When a sub address has been registered to
the destination of the Address Book, you can use the
destination. When a sub address-registered
destination in the Address Book is used for a One-
touch key, you can also use the One-touch key. In this
case, go to step 9.
4
Use the numeric keys to enter the fax number of the
other party.
• If Entry Check for New Destination is Off, press
[OK] to complete entering the number.
• If Entry Check for New Destination is On, press
[OK] and you are prompted to confirm the FAX
number is correct. Re-enter the same FAX number
and press [OK] to complete the entry.
For details, refer to Entry Check for New
Destination in the machine's Operation Guide.
To continue entering a new number, press [FAX No.
Entry] and repeat the above procedure.
To correct the FAX number, press [Edit].
5
Press [Detail].
6
Press [Change] of Sub Address.
7
Press [Sub Address] and enter the sub address
using the numeric keys.
NOTE:
You can use up to 20 digits including the
numbers from 0 to 9, ' (space)', '#' and '*' characters to
enter a sub address.
8
Press [Password] and enter the sub address
password using the numeric keys.
NOTE:
You can use up to 20 digits including the
numbers from 0 to 9, ' (space)', '#' and '*' characters to
enter a sub address password. When the machine
receives originals, a sub address password is not used.
9
Press [OK].
10
Press [OK].
11
Press the Start key. Transmission begins.
NOTE:
When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details, refer
to Confirmation Screen of Destinations on page 5-12.
FAX Operation (Advanced)