Canceling Communication - Kyocera TASKalfa 8000i Operation Manual

Canceling Communication

The method for cancelling communication with this machine differs depending on the transmission method
(memory transmission or direct transmission) and communication form. Methods of cancelling in various cases
are explained here.
Cancelling Memory Transmission (while originals are being scanned)
During memory transmission, to cancel scanning while originals are being scanned, press the Stop key on the
operation panel, or press [Cancel] on the touch panel. Scanning of originals is canceled, and the originals are
ejected. When originals remain in the document processor, take them out from the original output table.
Cancelling Memory Transmission (during communication)
During memory transmission, to cancel communication after it has started following the completed scanning of
originals, use the following procedure.
NOTE:
You can cancel transmission by disconnecting the telephone line. For details, refer to Cancelling
Transmission (Disconnection of Communication) on page 3-15.
Status
Scheduled Job
Status
Job Type All
Job No. Accepted Time Type Job Name
438
14:47 0123456789
Cancel Priority
Override
Printing Jobs Sending Jobs
Status
Cancelling and Sending Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than
waiting for the specified time, use the procedure below.
Log
User Name Status
InProcess
Detail
Storing Jobs Device/
Paper/Supplies
Communication
10/10/2010 10:10
1
Press the Status/Job Cancel key.
2
Press [Sending Jobs].
3
Select the job you want to cancel, and press
[Cancel].
When the cancel confirmation screen appears,
press [Yes].
1/1
Communication is canceled.
1
Press the Status/Job Cancel key.
2
Press [Sending Jobs], and then [Scheduled Job].
3-14
FAX Operation (Basic)