Expansion Memory; Dual Fax - Kyocera TASKalfa 8000i Operation Manual

Expansion Memory

Dual FAX

Dual FAX Settings
Refer to Selection of Telephone Line (Inch version only) on page 6-2 and Local FAX Information Entry on
page 6-4 when specifying the settings for the second line.
Reception Port Selection
You can make one of the 2 phone lines a receive-only line.
By installing the 128 MB expansion memory, you can
increase the image memory size and increase the
number of incoming (faxed) original pages that can be
stored. Call a service representative for mounting or
removal of the expansion memory.
Installing 2 optional FAX Kits (Dual FAX option) allows
you to use 2 phone lines. This reduces the time until
faxes are sent to all the recipients in tasks such as
sequential broadcast transmissions to multiple
recipients. Also, because you can then send and
receive simultaneously, there will be fewer occasions
when you cannot receive a fax during fax transmission.
1
Press the System Menu key.
2
Press [FAX], [Next] of Reception and then press
[Next] of FAX. Press [Change] of Reception Port.
3
Select a receive-only port. If you do not want to set
up a receive-only port, select [Off].
4
Press [OK].
7-3
Optional Equipment
7