Routing; Chapter 10 Routing; Default Gateway Setup; Figure 53 Advanced Setup > Routing > Default Gateway - ZyXEL Communications P-663H-51 User Manual

C
H A P T E R
This chapter shows you how to configure the default gateway and static routes for your
ZyXEL Device.

10.1 Default Gateway Setup

The default gateway is a neighboring router that helps the ZyXEL Device forward traffic to its
destination. Click Advanced > Routing > Default Gateway to open the following screen.
Use this screen to change the ZyXEL Device's default gateway settings.
Figure 53 Advanced Setup > Routing > Default Gateway
The following table describes the labels in this screen.
Table 39 Advanced Setup > Routing > Default Gateway
LABEL
Enable Automatic
Assigned Default
Gateway
Use Default
Gateway IP
Address
Use Interface
Save/Apply
P-663H-51 User's Guide
DESCRIPTION
Select this option if the ISP did not give you the IP address of the default
gateway. The ISP automatically assigns the WAN connection an IP address
when it connects.
If the ISP gave you a static (fixed) IP address, select this option and enter the
connection's IP address.
To have the ZyXEL Device use a specific WAN interface for sending traffic to the
default gateway, select this option and choose the WAN interface from the drop-
down list box.
Click this button to save the changes and have the ZyXEL Device start using
them.
10

Routing

97