Table of Contents
Advertisement
Chapter 3 Initial Configuration
3.2 QoS Configuration
If the ISP gave you QoS settings to use, click Advanced Setup > QoS and configure the
ZyXEL Device to use them. See
If the WAN connection uses VLAN multiplexing, you can apply different QoS settings to
different VLANs within the same WAN connection. If you are not using VLAN multiplexing,
you may need to configure separate WAN connections (using different PVCs) in order to give
different traffic different priorities.
3.3 Changing the Login Password
It is highly recommended that you periodically change the password for accessing the ZyXEL
Device. Click Management > Access Control > Passwords to display the screen shown next.
Use this screen to change the password. See
Figure 10 Management > Access Control > Passwords
38
Chapter 9 on page 89
for details.
Section 21.5 on page 135
for details.
P-663H-51 User's Guide
Advertisement
Table of Contents
Troubleshooting
