C
H A P T E R
This chapter explains how to map ports to PVCs and create bridging groups.
15.1 Port Mapping Setup
Click Advanced Setup > Port Mapping to open the following screen. Use this screen to map
ports to PVCs and create bridging groups.
Figure 62 Advanced Setup > Port Mapping
The following table describes the labels in this screen.
Table 47 Advanced Setup > Port Mapping
LABEL
Enable virtual ports
on
Group Name
Enable/Disable
Remove
P-663H-51 User's Guide
DESCRIPTION
Select this option to treat the LAN ports as separate (virtual) interfaces.
This is the name configured to identify the group.
Use this column to turn the entire group on or off.
To remove an entry, select its Remove check box and click the Save/Apply
button.
15
Port Mapping
111