Figure 44 Advanced Setup > Security > Mac Filtering; Table 29 Advanced Setup > Security > Mac Filtering - ZyXEL Communications P-663H-51 User Manual

To change your ZyXEL Device's MAC filter settings, click Advanced Setup > Security >
MAC Filtering. The screen appears as shown. You need to know the MAC addresses of the
devices to configure this screen.
Figure 44 Advanced Setup > Security > MAC Filtering
The following table describes the labels in this menu.
Table 29 Advanced Setup > Security > MAC Filtering
LABEL
MAC
Filtering
Global
Policy
VPN/VCI
Protocol
Destination
MAC
Source
MAC
Frame
Direction
Remove
Add
Remove
P-663H-51 User's Guide
DESCRIPTION
FORWARDED has the ZyXEL Device forward traffic for all MAC addresses except the
ones in the MAC filtering rules table below.
BLOCKED has the ZyXEL Device block traffic for all MAC addresses except the ones in
the MAC filtering rules table below.
Click Change Policy to reverse this setting.
The port (interface), VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier)
identify the ATM PVC (Permanent Virtual Circuit) to which this rule applies.
This is the type of packets to which this rule applies. Blank means all types.
The destination MAC addresses (in XX:XX:XX:XX:XX:XX format) of traffic that is
allowed or not allowed to go through the ZyXEL Device. Blank means all destination
MAC addresses.
The source MAC addresses (in XX:XX:XX:XX:XX:XX format) of traffic that is allowed or
not allowed to go through the ZyXEL Device. Blank means all source MAC addresses.
This is the direction of packet flow to which the rule applies.
To remove a rule, select its Remove check box and click the Remove button.
Click this button to go to a screen where you can configure settings for a new MAC
filtering rule.
To remove a WAN connection, select its Remove check box and click the Remove
button.
Chapter 8 Security
85