Chapter 15 Port Mapping
Table 47 Advanced Setup > Port Mapping (continued)
LABEL
Edit
Interfaces
Enable/Disable
Add
Save/Apply
15.2 Adding a Port Mapping
Click Advanced Setup > Port Mapping > Add to open the following screen. Use this screen
to map ports to PVCs and create bridging groups.
Figure 63 Advanced Setup > Port Mapping > Add
112
DESCRIPTION
Click Edit to configure the group's settings.
These are the interfaces that belong to the group.
Use this column to turn an individual interface on or off.
Click Add to open a screen where you can add a new entry.
Click this button to save the changes and have the ZyXEL Device start using
them.
P-663H-51 User's Guide