Table 2 Web Configurator Screens Summary - ZyXEL Communications P-663H-51 User Manual

Chapter 2 Introducing the Web Configurator

Table 2 Web Configurator Screens Summary

LINK/ICON
Device Info
Summary
WAN
Statistics
Route
ARP
DHCP
Advanced Setup
WAN
LAN
NAT
Security
Quality of
Service
34
SUB-LINK FUNCTION
This screen shows general device information such as the
firmware version, line rates, LAN IP address, default gateway,
and DNS servers.
This screen displays information about the ZyXEL Device's
WAN connections.
LAN This screen displays statistics about the ZyXEL Device's LAN
connections.
WAN This screen displays statistics about the ZyXEL Device's WAN
connections.
ATM This screen shows low-level ATM protocol statistics.
ADSL This screen displays statistics about the ZyXEL Device's
ADSL connection.
This screen displays information about the ZyXEL Device's
routes for sending traffic.
This screen displays the IP addresses and MAC addresses
that the ZyXEL Device has resolved.
This screen lists the ZyXEL Device's DHCP clients.
Use these screens to view and configure the ZyXEL Device's
WAN (Internet) connection settings.
Use this screen to configure LAN settings and the DHCP
server.
Virtual Servers Use this screen to configure NAT virtual server (port
forwarding) entries to have the ZyXEL Device forward traffic
from the WAN to LAN computers.
Port Triggering Use this screen to change your ZyXEL Device's port triggering
settings.
DMZ Host Use this screen to configure a DMZ host IP address to receive
packets from ports that are not specified in the virtual server
configuration.
IP Filtering Configure outgoing IP filtering to block LAN users or
applications from accessing the Internet. Configure incoming
IP filtering to allow certain traffic to come in from the Internet to
the LAN.
MAC Filtering Configure the MAC filter to block or allow access based on
MAC addresses.
Parental Control Configure days and times to block Internet access from
specific MAC addresses.
Use the first QoS screen to enable or disable QoS, and select
a DSCP mark to use on all outgoing packets that do not match
a QoS classification rule.
Queue Config This screen lists the QoS queues. A QoS queue sets the
priority used for incoming packets that the QoS classifier has
grouped into a flow.
QoS Configure QoS classifiers to group upstream traffic into data
Classifications flows according to specific criteria.
P-663H-51 User's Guide