Security; Chapter 8 Security; Outgoing Ip Filtering; Figure 40 Advanced Setup > Security > Ip Filtering > Outgoing - ZyXEL Communications P-663H-51 User Manual

C
H A P T E R
This chapter describes how to configure security settings.

8.1 Outgoing IP Filtering

By default, the ZyXEL Device allows traffic from the LAN to go to the Internet. Click
Advanced Setup > Security > IP Filtering > Outgoing to open the following screen. This
screen lists the currently configured filtering entries.
Figure 40 Advanced Setup > Security > IP Filtering > Outgoing
The following table describes the labels in this menu.
Table 25 Advanced Setup > Security > IP Filtering > Outgoing
LABEL
Filter Name
Protocol
Source
Address /
Mask
Source Port
Dest.
Address /
Mask
Dest. Port
Remove
Add
Remove
P-663H-51 User's Guide
DESCRIPTION
This is the name configured to identify the filter entry.
This is the type of packets to which this entry applies.
This is the IP address and subnet mask of a LAN computer to which this entry applies.
This is the source port for traffic (from the LAN) to which this entry applies.
This is the IP address and subnet mask of a computer on the Internet to which this entry
applies.
This is the destination port for traffic to which this entry applies.
To remove a rule, select its Remove check box and click the Remove button.
Click this button to go to a screen where you can configure settings for a new entry.
To remove a WAN connection, select its Remove check box and click the Remove
button.
8

Security

81