Mac Filtering Rules; Parental Control (Blocking Schedule); Figure 45 Advanced Setup > Security > Mac Filtering > Add; Table 30 Advanced Setup > Security > Mac Filtering > Add - ZyXEL Communications P-663H-51 User Manual

Chapter 8 Security

8.6 MAC Filtering Rules

To add a MAC filtering rule, click Advanced Setup > Security > MAC Filtering > Add. The
screen appears as shown.
Figure 45 Advanced Setup > Security > MAC Filtering > Add
The following table describes the labels in this menu.
Table 30 Advanced Setup > Security > MAC Filtering > Add
LABEL
Protocol
Destination
MAC
Source
MAC
Frame
Direction
WAN
Interfaces
Save/Apply

8.7 Parental Control (Blocking Schedule)

Click Advanced Setup > Security > Parental Control to display the following screen. This
screen shows policies controlling which days and times Internet access is blocked from
specific MAC addresses.
86
DESCRIPTION
Select the type of packets to which this rule applies. Leave it blank to apply the rule to all
types of packets.
Enter the destination MAC address (in XX:XX:XX:XX:XX:XX format) of traffic that is
allowed or not allowed to go through the ZyXEL Device. Leave it blank to apply the rule
to traffic going to any MAC address.
Enter the source MAC addresses (in XX:XX:XX:XX:XX:XX format) of traffic that is
allowed or not allowed to go through the ZyXEL Device. Leave it blank to apply the rule
to traffic coming from any MAC address.
Select the direction of packet flow to which the rule applies.
Select the WAN interface(s) to which this rule applies.
Click this button to save the changes and have the ZyXEL Device start using them.
P-663H-51 User's Guide