HP D5970A - NetServer - LCII Reference Manual page 24

Chapter 2
The 200/240 VAC, wide-range Power Distribution Unit (PDU) can be mounted in
several configurations with the LXr 8500. One of these configurations is shown in
Figure 2-2. Others are listed and illustrated throughout Chapter 3.
How to Position the PDU
Count the receptacles needed for each unit in the rack, notice where the PDUs can
be most conveniently located, and decide whether to orient the PDU vertically or
horizontally.
Horizontal Mounting
of Two PDUs in
a Fully Utilized
Rack
Cable Guides
Mounted on the
Column Across
from the Door
Hinges
Examples of
Data Cable
Routes from
Server to
Connectors on
Other
Components
Figure 2-2. Mounting a Pair of PDUs Horizontally (Rear View)
20
Rack Cabling References
200-240 VAC Wide-
Range 10-Amp,
19-Inch Power
Distribution Unit,
Installed
Horizontally
Behind the Monitor
(Power Cord
Connections
to Equipment
Are Not
Illustrated
Here)
Data Cables
Routed
through
Cable
Management
Arm
200-240 VAC Wide-
Range 16-Amp
PDU Mounted
Horizontally
Behind the
Uninterruptible
Power Supply