2. Install the GBIC
a.
Locate the short-wave GBIC (Gigabit Interface Converter) included in the FC I/O adapter kit.
b.
Install the GBIC into the receptacle on the FC I/O adapter (see figure 2).
NOTE
Do not attach Fibre Channel cables to the FC I/O adapter at this time. Also, do not reboot the HP NetServers at this time.
The GBIC can only be installed one way, because the GBIC and guide rails inside the FC I/O
adapter receptacle are keyed.
Installing the GBIC
To part 2 of the HP NetServer Installation Guide.
Figure 2. GBIC Module
7