HP D5970A - NetServer - LCII Configuration Manual page 8

Shared Storage Configurations
Configurations:
Basic
Redundant
Fibre Channel Hubs:
Model
No. of Hubs
Disk Arrays (See Shared
Storage.):
No. of Disk Arrays
No. of Controllers
LANs
LAN connection
NIC:
Model
Driver
No. of NICs
SPU I\O slot
See "Basic Configuration Cabling Diagrams with Single or Cascaded
Hubs."
See "Redundant Configuration Cabling Diagrams with Single or
Cascaded Hubs."
A3724A HP 10-port Short Wave Fibre Channel (FC) Hub
A4839A HP 10-port Long Wave FC Hub
Basic Configuration: 1 or 2
Redundant Configuration: 2 or 4 with 1 min. or 2. max. per FC
Arbitrated Loop.
1-8
1 per Disk Array for Basic Configuration.
2 per Disk Array for Redundant Configuration.
Intra-cluster (Heartbeat) LAN
HP D5954A crossover cable or any
equivalent
The intra-cluster LAN may only be used for
cluster node communication via a crossover
cable. It may not be used for client
communication.
HP D5013A (10/100TX PCI)
3.27.00.0001 or later (Do not enable FEC
Features.)
1
P5
Client LAN
Any LAN
Any that is on both the HP
Tested Products List and the
Microsoft Hardware
Compatibility List.
Any driver
NOTE: If the NIC used is the
same as the Intra-cluster LAN,
then the Client LAN must use the
same driver as the Intra-cluster
LAN.
1 minimum
P6
4