Shared Storage Cabling - HP D5970A - NetServer - LCII Configuration Manual

Shared Storage Cabling

This part of the guide defines the allowable cabling configurations for clusters using the HP NetServer
LXr 8000 and High Availability Disk Array Model 30/FC. Only these cabling configurations and cables
are supported.
See Shared
Storage Cables for
a list of cables that
can be connected
to the Short Wave
Ports of the hub.
Port connections to this
hub are for example
only. You can use any
port, except for port 10
on Long Wave Hubs.
The remaining ports can
be used for connection
of additional Disk Arrays.
Basic Configuration with Single Fibre Channel Arbitrated Loop Hub
5