Technical Information; Specifications - HP Vectra XU 5/XX Introduction Manual

Technical Information

Specifications

This chapter provides specifications for your PC. It also provides information on the
connector pins.
Feature:
Main Processor
Main Processor socket
Dual processor
Upgrade processor
Upgrade processor socket
Level-one cache
Level-two cache
Main memory (size/speed)
Video memory (size/speed)
Rear Connectors
25-pin ECP/EPP
bidirectional parallel port
9-pin serial port
Ethernet network interface
HP Vectra XU PC – Setting Up
Description:
Pentium 75, 90, or 100 MHz
320-pin "type 5" ZIF socket
Pentium 90, or 100 MHz
OverDrive for Pentium
320-pin "type 5" ZIF socket
Integrated write-back 8 KB data and 8 KB code
Integrated 256 KB write-back (some models have high-
speed burst synchronous cache)
Up to 256 MB (32 or 36-bit/70 ns must be added in pairs of
modules of equal size)
Some models have an integrated Ultra VGA PCI video
controller with 2 MB of video memory.
Some models have a Matrox video adapter board with 2 MB
of video memory which can be upgraded to 4 MB.
(Refer to Some of the Available Video Resolutions tables
later in this chapter for details.)
6-pin mini-DIN keyboard
6-pin mini-DIN mouse
25-pin ECP/EPP bidirectional parallel
9-pin RS-232-C/RS-422 serial
BNC coaxial STP Ethernet
8-pin RJ-45 UTP Ethernet
50-pin Fast SCSI-2
15-pin video.
Mode: bidirectional ECP — default, bidirectional EPP,
or Centronics® modes.
ECP/EPP Parallel port: 1 (378-37F h, IRQ 7) — default,
2 (278-27F h, IRQ 5), or Off.
Standard: RS-232-C/RS-422.
Serial port: 1 (3F8-3FF h, IRQ 4) — default, 2
(2F8-2FF h, IRQ 3), 3 (3E8-3EF h, IRQ 4), 4 (2E8-2EF h,
IRQ 3), or Off.
Standard: Ethernet, on PCI bus.
Technical Information 71