HP Vectra XU 5/XX Introduction Manual page 7

3. Unlock the cover using the key provided with the PC.
4. Unclip the tabs on each side of the cover, at the back of the PC.
5. Slide the cover forward 5 cm (2 inches), and lift it up and off the PC.
Converting from a Desktop to a Deskside Unit
Your PC can be used in either a desktop or a deskside position.
1. Remove the PC's cover as described earlier in this chapter.
2. Change the nameplate as follows:
a. From behind the front panel, push the nameplate's stem to release the locking tabs
from the cover.
b. Turn the nameplate into its deskside position. Align the key on the nameplate with
the hole in the cover. Then push the nameplate back into the cover.
HP Vectra XU PC – Setting Up Installing Accessories 7