HP Vectra XU 5/XX Introduction Manual page 2

In This Manual
Installing Accessories
Overview
Removing the Cover
Converting from a Desktop to a Deskside Unit
Where to Install the Accessories
Installing Mass Storage Devices
Installing IDE Devices
Installing SCSI Devices
Software Installation
Installing a Front-Access Device in the Middle or Bottom shelf
Installing a Hard Disk Drive in the Rear Shelf
Installing a Hard Disk Drive in the Bottom Shelf
Remove the Power Supply
Installing Main Memory Modules
Installing an Upgrade Processor
Setting the System Board Switches
Replacing the Power Supply
Installing Accessory Boards
Video Adapter
Upgrading the Matrox Video Adapter Board Memory
VESA Pass-through Connector
Replacing the Cover
Completing the Installation Procedure
Configuring Your PC
Overview
Starting SETUP
Using SETUP to Configure the PC
Setting the Date and Time, and User Preferences
Viewing Processor and Main Memory Information
Configuring the Disk Drives
Configuring the Security Features
Configuring the Ports
Configuring the Network Interface
Configuring Accessory Boards
Configuring the Integrated Video Refresh Rates
Displaying the BIOS Version and PC Serial Number
What to do Next
Video Configuration
Configuring the Integrated Ultra VGA PCI Video Controller
Configuring the Matrox Video Adapter Board
HP Vectra XU PC – Setting Up In This Manual 2