5.10 Real Time Clock (RTC) Battery
Prepare the computer for disassembly (Section 5.5).
1.
Turn the computer upside down with the rear panel facing forward.
2.
Remove the RTC battery cover by lifting it at the indentation
3.
Remove the battery from the base enclosure
4.
Use the connector removal tool to disconnect the RTC battery cable from the system
5.
.
board
Remove the battery.
6.
Figure 5-13. Removing the RTC Battery
Reverse the above procedure to install the RTC battery.
(Figure 5-13).
.
Removal and Replacement Procedures 5-15