Section 3. Run Hp Diagtools; Section 4. Using The Startup Cd - HP Tc2100 - Server - 128 MB RAM Installation Manual

Chapter 1

Section 3. Run HP Diagtools

To perform HP Diagtools hardware diagnostic on your HP Server tc2100, switch
off your HP server then reboot on the Startup CD and follow the on-screen
instructions. View and save the hardware inventory after the test.

Section 4. Using the Startup CD

The Startup CD included with your HP Server tc2100 system may be used as
follows:
Startup CD Usage
Method 1
Insert CD in your new
HP server and reboot it.
This will run HP
Diagtools (a DOS
program)
* This method is not available on NetWare servers since they don't have an HTML browser.
2
Preparing your HP Server tc2100 for your NOS installation
Method 2
Insert the CD in a
Windows or Linux PC.
Open the file start.htm.
This allows you to access
manuals and create
drivers diskettes
(HTML menus and PDF
files)
Requires PC with
browser and Adobe
Acrobat Reader.
Method 3
Insert the CD in the
server once the NOS is
running.*
Open the file start.htm.
This allows you to access
manuals, create drivers
diskettes and provides an
automated installation
of Windows NT or 2000
video drivers (HTML
menus and PDF files).
Requires PC with
browser and Adobe
Acrobat Reader.