HP Tc2100 - Server - 128 MB RAM Installation

Product Update: HP Server tc2100 Network Operating
System (NOS) Installation
Corrections to the NOS Installation Guide
Page 2 - Using the Startup CD
The table titled "Using the Startup CD": refers to the file <start.htm>. It should be <startup.htm>.
Page 5 - Microsoft NT4.0 drivers installation
Under the title, Phase 1 - Driver Installation, steps 4 and 5 should be reversed to read:
4. Press Enter to launch the automatic detection of mass storage device. It will detect the IDE CD-ROM and
propose the appropriate driver.
5. If you have a SCSI model:
a. Press S to specify additional SCSI adapters. The Windows NT installer will display a scrolling list of options.
b. Press Enter to select the default option "Other (Requires Disk provided by a hardware
manufacturer )".
c. When prompted to insert the "Manufacturer-supplied hardware support disk ", insert the HP
Server tc2100 Windows NT SCSI driver (HP disk NT#1) diskette into floppy drive then press Enter.
d. Press Enter to select the "Adaptec Ultra160 Family PCI SCSI controller "
Page 35 - Installation flow for NetWare installations
The high-level process flow in the NetWare installation refers to Win2k installation and should be replaced with the
following:
High level process flow
1. Run HP DiagTools (optional - diagnostics).
2. Create the drivers diskette using the HP Startup CD.
3. Perform NetWare installation.
4. Install the Support Pack.
Page 36 - Installation details for Novell Small Business Suite 5.1
HP has detected a compatibility issue related to Novell Small Business Suite 5.1. The following instructions replace the
instructions for Novell Small Business Suite 5.1 provided by the HP Server tc2100 NOS Installation Guide.
Note: You should still refer to the HP Server tc2100 NOS Installation Guide existing instructions for Novell NetWare 5.1.
HP Part Number 5971-4537, Doc # 5971-4537-1
Printed in October 2001
'"&$ (!" $'
1