Phase 2 - Perform Hardware Status Check - HP Tc2100 - Server - 128 MB RAM Installation Manual

Chapter 3 Installing Microsoft Windows 2000 Server and Small Business Server 2000
20. If you installed Windows 2000 Server, "Windows 2000 Configure Your
Server" will launch. Close this window as we will postpone the
customization of your server until completion of all the installation steps.
21. If you installed Microsoft Small Business Server 2000, Click Cancel to
close the "Setup needs the location of the Small
Business server 2000 Setup files..." window.
NOTE You may open the "Windows 2000 Configure Your Server" wizard at any point
of time by clicking Start | Programs | Administrative Tools | Configure Your Server.
PHASE 2 – Perform Hardware Status Check
In this section you will run Windows 2000 Device Manager tool to identify any
issues with the installed devices or resource conflicts.
1. Open Start | Settings | Control Panel | System | Hardware | Device
Manager.
2. Verify that no devices have either a yellow band (!) or question mark (?)
symbol next to it.
o Yellow (!) means that there is a resource issue with the device.
o Question (?) means that the device is unknown.
If (!) or (?) symbols are reported then double click on each of the devices
with (!) or (?). Use the "Device Status" message for troubleshooting. Or if a
printer is available, use the View, Print from the menu to get a report.
3. Verify if the installed drivers are digitally signed.
a. In the Device Manager, select the device (e.g HP NetRAID-1M) that
you want to verify.
b. Right click Properties | Driver.
c. Locate the "Digital Signer:" If the driver of that device is digitally signed
then it will display "MS Windows 2000 Publisher" or
"Microsoft Windows Hardware Compatibility
Publisher". If the driver of the device is not digitally signed we
recommend that you check the HP Website
latest driver package.
4. Exit the Device manager, System Properties and Control Panel applications.
5. Check the Event viewer to make sure that there are no errors in the log.
Click on Start | Programs | Administrative tools | Event viewer.
20
www.hp.com to install the