Unpacking The Image And Tools For Deployment; Deploying With Pxe - HP vc4820T - Thin Client Troubleshooting Manual

Troubleshooting guide: hp vc4820t and vc4825t thin clients

Hide thumbs Also See for vc4820T - Thin Client:

Table of Contents

Unpacking the Image and Tools for Deployment

Click Deployment.

When prompted, select the destination directory for the imaging tools and image.

The components that comprise DSKIMG.BIN are then unbundled. When this process is complete, there

are three new files: IBR.EXE (the image restoration utility), FLASH.xx (the OS image), and

README.TXT

NOTE:

Linux uses the file name FLASH.DD while other operating system images use FLASH.IMG

Ensure that IBR.exe and Flash.img are stored in the same directory on the server.

Add [full path]\IBR.exe -y [full path]\Flash.img hd0 to the PXE command file,

and then run it.

To view the IBR command line options: At the command prompt, type IBR.EXE /? and press Enter.

Refer to

Configuring a PXE Server on page 57

Microsoft RIS. See your documentation if using a different PXE server, such as Altiris Deployment

Solution.

for instructions about setting up a PXE Server using

Unpacking the Image and Tools for Deployment

Table of Contents

Vc4825t