Adjusting The Mid-Weight Outer Slide Assemblies - HP C8000 - Workstation - 0 MB RAM Installation Instructions Manual
Mid-weight slide kit
Hide thumbs
Also See for C8000 - Workstation - 0 MB RAM:
- Technical reference manual (114 pages) ,
- Hardware and software setup manual (40 pages) ,
- Quickspecs (27 pages)
Table of Contents
Advertisement
4.
Extending the cable management arm, slide the server
forward.
5.
Route the cables through the cable management arm.
6.
Install hook-and-loop straps, as needed, to secure the cables.
(Optional) Adjusting the mid-weight outer slide
assemblies
NOTE: These steps apply only if the adjustment of the
outer slide assemblies are necessary to fit shallower or
deeper third-party racks.
1.
Remove the slide-locking clips from the outer slide assemblies.
2.
Adjust the slide assemblies for your rack, and then install the
slide-locking clips.
Advertisement
Table of Contents
