HP c8000 Release Note

Release Notes for HP Common 3D Graphics for HP-UX 11.11 (June 2004)
on PA-RISC Based Systems (HP-UX 11.i version 1)
----------------------------------------------------------------------
Print Date: June 2004
Copyright (C) Hewlett-Packard Development Company 2004
FireGL is used under license and is a registered trademark or trademark of ATI
Technologies Inc. in the United States and other countries.
1. ANNOUNCEMENTS
These Release Notes contain information that is common to the Xlib and the
following 3D graphics APIs: HP OpenGL, Starbase, HP-PHIGS, and HP PEX. For
specific information on each API, see their respective Release Notes. The on-
line Release Notes for the 3D graphics APIs are:
Common:
/opt/graphics/common/11.00_Rel_Notes
HP PEX:
/opt/graphics/PEX5/11.00_Rel_Notes
/opt/graphics/PEX5/newconfig/opt/graphics/PEX5/11.00_Rel_Notes
Starbase:
/opt/graphics/starbase/11.00_Rel_Notes
/opt/graphics/starbase/newconfig/opt/graphics/starbase/11.00_Rel_Notes
HP-PHIGS:
/opt/graphics/phigs/11.00_Rel_Notes
/opt/graphics/phigs/newconfig/opt/graphics/phigs/11.00_Rel_Notes
HP OpenGL:
/opt/graphics/OpenGL/11.00_Rel_Notes
For additional information on each API, see the "Graphics Administration
Guide" which can be viewed at http://www.hp.com/support/workstation_manuals.
2. WHAT'S IN THIS VERSION?
The 3D graphics software released with the HP-UX 11.11 Operating Environment
June 2004 release is supported on B, C, and J-class workstations. The
following features are included with this release:
* Support for New Devices: ATI FireGL
C8000 workstation only)
See the following documentation for more information:
* The "Addenda -- Additional Graphics Information" section of this document
* The Release Notes for your particular 3D graphics API
These documents can be viewed at
3. KNOWN PROBLEMS AND WORKAROUNDS
N/A
4. COMPATIBILITY AND INSTALLATION REQUIREMENTS
Software Requirements
=====================
TM
X1 and ATI FireGL T2 (supported on
http://www.hp.com/support/workstation_manuals
.