HP 1 10V/220V Light Rack
© Copyright 2004, 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 365456-002
August 2007 (Second Edition)
About this device
The HP 110V/220V Light Rack Option Kit enables you to add a
light to the rack.
The items required for installation include:
110V/220V light unit (with cover)
F14W/133-T8 fluorescent lamp
Power cord (10 ft), C13-C14
You will need a flat-head screwdriver.
Important Safety Information
Before installing this product, read the Important
Safety Information guide provided.
WARNING: To reduce the risk of personal injury, fire, or
damage to the equipment, do not overload the HP
110V/220V Light Rack Option Kit.
WARNING: The fluorescent lamp contains mercury.
Therefore, at end-of-life, the fluorescent lamp may require
WARNING: To reduce the risk of personal injury or
damage to the equipment, be sure that:
The leveling feet are extended to the floor.
The full weight of the rack rests on the leveling feet.
The stabilizing feet are attached to the rack if it is a
The racks are coupled together in multiple-rack
Only one component is extended at a time. A rack
may become unstable if more than one component is
extended for any reason.