Repeating Defects - Lexmark C734dn User Manual

C
HECK THE DARKNESS
The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too
low.
Change these settings from the printer control panel Quality menu.
•
For Windows users, change these settings from Print Properties.
•
For Macintosh users, change these settings from the Print dialog and pop-up menus.
•
T
HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
Load paper from a fresh package.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C
HECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.
2
Before sending the job to print, specify the correct type setting:
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.
•
C S
OLOR AVER MAY BE SET TO
Turn Color Saver off in the printer control panel Quality menu.
T
HE TONER MAY BE LOW
Replace the toner cartridge.
T
HE TONER CARTRIDGE MAY BE WORN OR DEFECTIVE
Replace the toner cartridge.

Repeating defects

These are possible solutions. Try one or more of the following:
, ,
BRIGHTNESS AND CONTRAST SETTINGS
O
N
Troubleshooting
187