Use both sides of the paper
If your printer model supports duplex printing, you can control whether print appears on one or two sides of the
paper by selecting 2-sided printing from the Print dialog or the Lexmark Toolbar.
Place multiple pages on one sheet of paper
You can print up to 16 consecutive pages of a multiple-page document onto one side of a single sheet of paper by
selecting a setting from the Multipage printing (N-Up) section of the Print dialog.
Check your first draft for accuracy
Before printing or making multiple copies of a document:
Use the preview feature, which you can select from the Print dialog or the Lexmark Toolbar, to see how the
•
document will look before you print it.
Print one copy of the document to check its content and format for accuracy.
•
Avoid paper jams
Carefully select and load paper to avoid paper jams. For more information, see "Avoiding jams" on page 151.
Saving energy
Using Eco-Mode
Use Eco-Mode to quickly select one or more ways to reduce your printer's environmental impact.
Note: See the table for the multiple settings that change when you select an Eco-Mode setting.
Choose
To
Energy
Reduce energy use, especially when the printer is idle.
Printer engine motors do not start until a job is ready to print. You may notice a short delay before the
•
first page is printed.
The printer enters Power Saver mode after one minute of inactivity.
•
When the printer enters Power Saver mode, the printer control panel display light is turned off.
•
Paper
Enable the automatic duplex feature (on printer models that support duplex).
•
Turn off print log features.
•
Energy/Paper Use all the settings associated with Energy mode and Paper mode.
Off
Use factory default settings for all settings associated with Eco-Mode. This setting supports the
performance specifications for your printer.
1
Make sure that the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the up or down arrow button until Settings appears, and then press
4
Press the up or down arrow button until General Settings appears, and then press
.
Minimizing your printer's environmental impact
50
.
.