Menu item
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
Yes
No
Remote Syslog Facility
0-23
Severity of events to log
0-7
Set Date/Time menu
Menu item
View Date/Time
Set Date/Time
<input date/time>
Time Zone
<list of time zones>
Observe DST
On
Off
Enable NTP
On
Off
Description
Specifies whether and how the audit logs are created
Notes:
Enable audit determines if events are recorded in the secure audit log and
•
remote syslog. No is the factory default setting.
Enable remote syslog determines if logs are being sent to a remote server. No
•
is the factory default setting.
Remote syslog facility determines the value used to send logs to the remote
•
syslog server. 4 is the factory default setting.
With the security audit log activated, the severity value of each event is
•
recorded. 4 is the factory default setting.
Description
Lets you view the current date and time settings for the printer
Note: Date/Time is set in YYYY-MM-DD HH:MM format.
Note: GMT is the factory default setting.
Note: On is the factory default setting and uses the applicable Daylight Saving Time
associated with the Time Zone setting.
Enables Network Time Protocol, which synchronizes the clocks of devices on a
network
Note: On is the factory default setting.
Understanding printer menus
109