52 Not enough free space in flash memory for resources
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press
•
operation and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
Delete fonts, macros, and other data stored in flash memory.
•
Upgrade to a larger capacity flash memory card.
•
54 Network <x> software error
Press the up or down arrow button until Continue appears, and then press
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
•
54 Standard network software error
Try one or more of the following:
Press the up or down arrow button until Continue appears, and then press
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
•
55 Unsupported option in slot <x>
<x> is a slot on the printer system board.
Try one or more of the following:
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the unsupported option card from the printer system board.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
56 Parallel port <x> disabled
Press the up or down arrow button until Continue appears, and then press
•
The printer discards any data received through the parallel port.
Make sure the Parallel Buffer menu item is not set to Disabled.
•
56 Serial port <x> disabled
Press the up or down arrow button until Continue appears, and then press
•
The printer discards any data received through the serial port.
Make sure the Serial Buffer menu item is not set to Disabled.
•
Troubleshooting
167
to stop the defragment
to continue printing.
to clear the message
to clear the message.
to clear the message.