Menu item
PCL Emulation Settings
Auto CR after LF
On
Off
PCL Emulation Settings
Auto LF after CR
On
Off
Tray Renumber
Assign MP Feeder
Off
None
0–199
Assign Tray <x>
Off
None
0–199
Assign Manual Paper
Off
None
0–199
Assign Man Env
Off
None
0–199
Tray Renumber
View Factory Def
MPF Default = 8
T1 Default = 1
T2 Default = 4
T3 Default = 5
T4 Default = 20
T5 Default = 21
Env Default = 6
MPaper Default = 2
MEnv Default = 3
Tray Renumber
Restore Defaults
Yes
No
Description
Specifies whether the printer automatically performs a carriage return (CR)
after a line feed (LF) control command
Notes:
Off is the factory default setting.
•
Setting alterations are duplicated in the PPDS menu.
•
Specifies whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command
Notes:
Off is the factory default setting.
•
Setting alterations are duplicated in the PPDS menu.
•
Configures the printer to work with printer software or programs that use
different source assignments for trays, drawers, and feeders
Notes:
Off is the factory default setting.
•
None is not an available selection. It is displayed only when it is selected
•
by the PCL 5 interpreter.
None ignores the Select Paper Feed command.
•
0–199 allows a custom setting to be assigned.
•
Displays the factory default setting assigned to each tray, drawer, or feeder
Returns all tray, drawer, and feeder assignments to the factory default settings
Understanding printer menus
125