5022-xxx
Left cover removal
See
"Left cover" on page 7-3
1.
Place the printer on the table with the left side edge hanging over slightly.
2.
Remove the waste toner assembly. See
3.
Open the top access door.
4.
Open the front access door.
5.
Remove the three screws (A).
6.
Press the locking tab (B), slide the cover down, and lift the bottom out to remove the cover.
Warning: Be careful not to damage the two small locking tabs (C).
4-20
Service Manual
for the part number.
"Waste toner assembly removal" on page
A
4-93.
C
B