The paper you choose to print the page on should be either Letter or A4.
To run the Quick Test (duplex):
1.
Select Quick Test from DUPLEX TESTS.
2.
Select Single or Continuous.
•
The single Duplex Quick test cannot be canceled.
•
The printer attempts to print the Quick Test Page from the default paper source.
•
Check the Quick Test Page for the correct offset between the placement of the first scan line on the
front and back side of a duplexed sheet.
The single test stops automatically when a single duplex sheet is printed, and the continuous test continues until
)
you press Stop (
.
Print Test (duplex)
This test provides service personnel with a way to verify the function of the printer's duplex hardware. After the
user selects this test, the device automatically executes a continuous print test that generates a duplexed, color
output page. To stop the test, the user must press Stop (
blinks green and the panel displays "DUPLEX TESTS Printing...".
The paper you choose to print the page on should be either Letter or A4.
To run the Print Test (duplex):
1.
Select Print Test from DUPLEX TESTS. The printer executes a continuous print test that generates a
duplexed, color output page.
2.
To stop the test, press Stop (
). While this test executes, the power indicator light
)
.
5022-xxx
3-13
Diagnostic aids