Operator Panel Outer Bezel Removal - Lexmark C520 Service Manual

Operator panel outer bezel removal

See "Outer bezel, C52x" on page 7-3
specific models for the bezels for the C53x models.
1.
Using a flathead screwdriver or similar tool, unsnap the locking tabs (A) on the upper left and the upper
right of the outer bezel.
Note: The top portion of the operator panel disengages with the outer bezel. Flex the top of outer bezel to
disengage the operator panel.
2.
For models C52x: Remove the outer bezel with the inner bezel (B) attached.
For models C53x: Remove the bezel. The bezel is one piece for this set of models.
Installation note: When reinstalling or replacing the outer bezel, insert the bottom of the bezel first, ensuring
that the outer bezel bottom portion fully seats.
for the part number for the C52x models. See the same page for the
B
A
Repair information
5022-xxx
4-21