5022-xxx
7.
Raise front access door to closed position.
8.
Looking down at keyed end of restraint (D), twist the end clockwise, slide restraint upward through slit (E)
and slip end of restraint (D) through keyed hole (F). Repeat for other side.
9.
Slide front access cover assembly forward, away from printer.
Left cover removal
1.
Remove waste toner assembly. See
2.
Open front access door.
3.
Remove three screws (A).
4.
Depress locking tab (B), press down on cover and slide bottom of cover away from printer. Be careful not to
damage the two small locking tabs that are shown in the illustration..
4-20
Service Manual
"Waste toner assembly removal" on page
4-15.