Front door assembly removal
See the part number for the Front door assembly for the specific model you need on
1.
Remove the front access cover assembly. See
page
4-16.
2.
Remove the rear cover. See
3.
For C52x only: Disconnect the JTRANS1 cable (A) from the system card.
For C53x only: Disconnect the JTRANS2 cable (A) from the system card.
Note: If you have a duplex model, also disconnect the JDUPLX1 cable (B) from the system card.
"Front access door cover assembly removal" on
"Rear cover removal" on page
A
page
7-5.
4-25.
B
Repair information
5022-xxx
4-55