Contents Maintaining the printer................3 Storing supplies............................3 Checking the status of supplies.........................3 Conserving supplies...........................3 Aligning the toner cartridges........................3 Cleaning the printhead lenses........................4 Ordering supplies............................5 Ordering toner cartridges ........................... 5 Ordering a transfer belt ............................6 Ordering a waste toner box ..........................7 Ordering a fuser..............................
Maintaining the printer Periodically, certain tasks are required to maintain optimum print quality. Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them. Do not expose supplies to: •...
Press again to print the alignment page. Press until Set A appears, and then press From the printed sheet, find the straightest of the 20 lines beside the letter A. Press until that number is displayed, and then press Submitting Selection appears. Repeat steps 6 through 8 to align sets A through L.
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place you purchased the printer.
Part name Part number For printer(s) Yellow High Yield Return Program Toner C5240YH C532, C534 Cartridge Black High Yield Return Program Toner C5240KH C534 Cartridge Cyan High Yield Toner Cartridge C5242CH C532, C534 Magenta High Yield Toner Cartridge C5242MH C532, C534 Yellow High Yield Toner Cartridge C5242YH C532, C534...
Ordering a waste toner box When 82 Waste Toner Box Nearly Full or 82 Replace Waste Toner Box appears, you need to order a replacement waste toner box. Part number Part name C52025X Waste toner box Ordering a fuser When Fuser Life Warning appears, replace the fuser soon. Make sure one is on order. When Replace Fuser appears, replace the fuser immediately.
• Disconnect all cords and cables from the printer before moving it. • Remove all printer options before moving the printer. Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty. Moving the printer to another location The printer and options can be safely moved to another location by following these precautions: •...
Need help?
Do you have a question about the 34B0185 - High Voltage Laser Printer and is the answer not in the manual?
Questions and answers