Table of Contents
Advertisement
2. Program lock
The function of changeable programs can be restricted in order not to change the contents of
the program by mistake.
Turn off the power switch, and turn on the DIP-SW A8 on the operation panel.
Program will be locked when the power switch is turned on.
A dot is displayed to show the program is locked at lower and right side of the program No.
display window q.
Items shown below only can be changed while the program is locked.
Program No.
Sewing distance
Cycle program No.(mode)
Operation setting for the center knife, corner knife and stacker
(Note) Setting function can not be used.
DIP Switch A
1638S
0176Q
Program locked
1483S
BAS-6150
Chapter 3 Settings
q
1457S
51
Advertisement
Table of Contents
