Table of Contents
Advertisement
Chapter 7 Environment setting
2. Machine test mode
1. Settings are performed as for [No.53 Machine test rotation number], [No.54 Center knife
setting at machine test], [No. 55 Machine test repetition number], [No.56 Machine operation
time], and [No.57 Machine stop time] in environment parameter setting.
2. Likewise, change the contents of environment parameter of [No.57 Machine test mode] to
ON DISPLAY.
3. With that condition, press the start switch q and then the machine starts to operate.
The "ENTER" key e is not pressed
4. Press the "RESET" key w and then the machine stops to end the machine test mode.
5. Press the "ENTER" key e to end the environment parameter setting.
86
w
q
1463S
BAS-6150
e
1457S
Advertisement
Table of Contents
