Table of Contents
Advertisement
2-4. How to adjust the marking light beam
(Note) Adjust the focus of light before setting the cloth.
t
r
1. The marking light turns on when the power
switch q is set to ON.
q
1462S
2. Loosen screw w and adjust the focus by
letting lens hood e up and down to be able
to have a clear view of the mark "
on the cloth.
3. Set the mark "
startup and end of sewing) by loosening fly
screw r.
(Note) Find the front and rear position of sewing startup
w
e
1471S
BAS-6150
" at the best position (for
by adjusting bolt t.
Chapter 2 Sewing flow
" reflected
37
Advertisement
Table of Contents
