5. Sensor check
The items as shown below can be checked:
Sensor and switch
DIP switch
Voltage of 210 V and 55 V
Voltage of 30 V and 24 V
1. Set DIP switch B6 (refer to [ Chapter 8 DIP switch]) to ON.
2. Set the power supply switch to ON.
The start switch is not pressed. When the sensor or the switch is set to ON, the corresponding LEDs in the program No. display window
q and contents display window w turn on.
3. Press the ∆∇ key,
checked.
r
key, "ENTER" key e, and "SELECT" key r to change items to be
BAS-6150
Chapter 7 Environment setting
q
w
e
1457S
89