Center Knife And Corner Knife Correction - Brother BAS-6150 Instruction Manual

Chapter 3 Settings

1-2. Center knife and corner knife correction

Settings can be performed as for start of sewing and end of sewing for center and corner knives.
1. Press ∆∇ key to display the program No. you want to change on the program No. display
window q.
2. Keep pressing the "SELECT" key e till LED w in [ADJUST] is lit.
3. The mode is changed to the program mode by pressing the "ENTER" key r. The correction
code is displayed to blink in the program No. display window q and the correction value is
displayed to blink in the contents display window t.
Correction value
Center knife start
of sewing
Center knife end of
sewing
LED y in [CUTTER] in correction of the center knife blinks and so does LED u in [CORNER
CUT] in correction of the corner knife.
4. Press ∆∇ key to change the kind of correction value.
5. Press key to change the correction value.
The correction value ranges from -9.9 to 9.9 in the unit of 0.1 mm. (Nos. do not show the real dimension but does a rough idea.)
Center knife
6. Press the "ENTER" key r to memorize the changed contents.
48
y
u
w
Display symbol
Start of sewing
End of sewing
1479S
e r
Correction value
Corner knife start
of sewing
Corner knife end of
sewing
Corner knife
BAS-6150
q
t
Display symbol
Start of sewing
End of sewing
1480S
1457S