Lcd Panel Messages; Status Monitor Alerts; Enabling The Non Genuine Toner Mode; Using The Operator Panel - Epson WorkForce AL-MX200DNF User Manual

LCD Panel Messages

The LCD panel provides you with information and troubleshooting help. When an error or warning
condition occurs, the LCD panel displays a message informing you of the problem.
See Also:
"Understanding Printer Messages" on page 366

Status Monitor Alerts

Status Monitor is a tool that is included on the Software Disc. It automatically checks the printer status
when you send a print job. If the printer is unable to print your job, Status Monitor automatically
displays an alert on your computer screen to let you know that the printer needs attention.

Enabling the Non Genuine Toner Mode

When toner within the toner cartridge is empty, the message, 093-933, appears.
When you want to use the printer in the Non Genuine Toner mode, enable the Non Genuine Toner
mode and replace the toner cartridge.
Important:
If you use the printer in the Non Genuine Toner mode, the performance of the printer may not be at its
optimum. And any problems that may arise from the use of the Non Genuine Toner mode are not
covered by our quality guarantee. The continuous use of the Non Genuine Toner mode can also cause the
printer to break down, and any repair charges for such break down will be incurred by users.
Note:
To disable the Non Genuine Toner mode, select Off for Toner of Non Genuine Toner on the operator
panel or clear the check box next to On on the Non Genuine Toner page of the Printer Maintenance tab
of the Printer Setting Utility.

Using the Operator Panel

Note:
Before starting the operation described below, confirm that the LCD panel shows Select Function.
1. Press the System button.
AL-MX200 Series User's Guide
Troubleshooting 378