Connecting The Telephone Line - Epson WorkForce AL-MX200DNF User Manual

Chapter 8
Faxing

Connecting the Telephone Line

Note:
❏ If the Service Lock setting for FAX is set to Password Locked, you need to enter the four digit
password to use the fax function. If the Service Lock setting is set to Locked, the fax function is
disabled and the menu is not displayed on the LCD panel. For more information, see "Service Lock"
on page 302.
❏ Do not connect your printer directly to a DSL (digital subscriber line). This may damage the printer.
To use a DSL, you will need to use an appropriate DSL filter. Contact your service provider for the
DSL filter.
1. Plug one end of a telephone line cord to the wall jack connector and the other end to an active wall
jack.
1 Wall jack connector
2 To the wall jack
Note:
The supplied telephone cord has four-contact plugs. It is recommended you use a telephone cord with
four-contact plugs and a wall jack with four contacts for a telephone line connection.
AL-MX200 Series User's Guide
Faxing 221