Direct Printing Using A Usb Storage Device - Epson WorkForce AL-MX200DNF User Manual

2. After the even pages are printed, remove the paper stack from the center output tray.
Note:
Warped or curled prints can cause paper jams. Straighten them before setting them.
3. Load the paper stack back into the PSI, and then press the
Pages are printed in order of page 1 (rear of page 2), page 3 (rear of page 4), and then page 5 (rear of
page 6).

Direct Printing Using a USB Storage Device

The Print From USB Memory feature allows you to print files stored in a USB storage device by
operating on the operator panel.
Important:
❏ To prevent damage to your printer, DO NOT connect any device other than the USB storage device to
the front USB port of the printer.
❏ DO NOT remove the USB storage device from the front USB port until the printer is finished with
printing.
Note:
If the Service Lock setting for Print from USB is set to Password Locked, you need to enter the
four digit password to use the Print From USB Memory feature. If the Service Lock setting for Print
from USB is set to Locked, the Print From USB Memory feature is disabled and the menu is not
displayed on the LCD panel. For more information, "Service Lock" on page 302.
AL-MX200 Series
button.
Printing Basics
User's Guide
146