Fax Settings - Epson WorkForce AL-MX200DNF User Manual

*
No
*
Factory default menu setting
PS Data Format
Purpose:
To set the PS data communications protocol. To make any changes effective, turn off the printer and
then turn it back on.
Values:
*
Auto
Standard
BCP
TBCP
*
Factory default menu setting

Fax Settings

Use the Fax Settings menu to configure the basic fax settings.
Ans Select
Purpose:
To specify the default fax receiving mode.
Values:
TEL Mode
*
FAX Mode
TEL/FAX Mode
Ans/FAX Mode
Does not initialize the wired network data stored in NVM.
Sets the PS data communications protocol automatically.
Sets the PS data communications protocol to Standard.
Sets the PS data communications protocol to BCP.
Sets the PS data communications protocol to TBCP.
The printer does not automatically receive faxes. To receive an incoming fax,
you need to pick up the handset of the connected external telephone and press
the 2-digit code.
The printer automatically receives faxes.
When the printer receives an incoming fax, the external telephone rings for the
period of time specified for Auto Ans. TEL/FAX, and then the printer
automatically receives a fax. If an incoming call is not a fax, the printer beeps
from the internal speaker indicating that the call is a telephone call.
The printer shares the telephone line with an answering machine and monitors
the line for a fax tone. It will pick up an incoming call if it hears a fax tone. This
option is not available in regions where a serial phone system is employed.
Using the Operator Panel Menus and Keypad
AL-MX200 Series User's Guide
282