Clearing Jams; Avoiding Jams - Epson WorkForce AL-MX200DNF User Manual

Chapter 10
Troubleshooting

Clearing Jams

Careful selection of appropriate print media and proper loading allow you to avoid most jams.
!
Warning:
If you cannot remove the paper jam by doing the procedures in the manual, do not try to forcibly
remove the jam. Doing so may cause injuries. Contact your local Epson representative.
See Also:
❏ "About Print Media" on page 115
❏ "Supported Print Media" on page 119
Note:
Before buying large quantities of any print media, it is recommended that you try a sample first.

Avoiding Jams

❏ Use only recommended print media.
❏ See "Loading Print Media in the Paper Tray" on page 123 and "Loading Print Media in the Priority
Sheet Inserter (PSI)" on page 132 to load print media properly.
❏ Do not load print media before turning on the printer.
❏ Do not overload the print media sources.
❏ Do not load wrinkled, creased, damp, or curled print media.
❏ Flex, fan, and straighten print media before you load it. If a jam occurs with print media, try
feeding one sheet at a time through the paper tray or the Priority Sheet Inserter (PSI).
❏ Do not use print media that you have cut or trimmed.
❏ Do not mix print media sizes, weights, or types in the same print media source.
❏ Ensure that the recommended print surface is face up when you load print media in the paper tray
or the Priority Sheet Inserter (PSI).
AL-MX200 Series User's Guide
Troubleshooting 329